LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1347 (Cylinder Head, VALVETRAIN (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Balance Shaft Drive Chain, Removing And Installing >> Removing

Balance Shaft Drive Chain, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove The Camshaft Timing Chain. Refer To CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove The Camshaft Timing Chain Tensioner -3-.

GWWA15-10460Courtesy of AUDI OF AMERICA, LLC

-- Remove The Chain Tensioner For The Balance Shaft Drive Chain -1-.

GWWA15-10462Courtesy of AUDI OF AMERICA, LLC

-- Remove The Tensioning Rail -2-.

-- Remove The Guide Rail -3-.

-- Remove The Guide Rail -4-.

-- Remove The Timing Chain.