LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (General, Technical Data [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> 00 General, Technical Data >> Safety Precautions >> Safety Precautions When Working On Ignition System

Safety Precautions When Working On Ignition System

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Risk of Injury Due to Electrocution

When the engine is running the ignition system is under high-voltage. It is possible to be electrocuted by touching the ignition system.

-- Never touch or remove the ignition wires when the engine is running or at cranking speed.

CAUTION:

Risk of Damaging the Components

Washing the engine as well as connecting and disconnecting wires when the engine is running can damage components.

-- Switch off the ignition before connecting and disconnecting wires.

-- Switch off the ignition before washing the engine.