Part III
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Part I. Refer To OVERVIEW - TURBOCHARGER .
Part II. Refer To OVERVIEW - TURBOCHARGER .
Part IV - 1.8L Engine Only. Refer To OVERVIEW - TURBOCHARGER .
- Gasket
- Always replace after removing
- Nut
- Tightening Sequence. Refer To TIGHTENING SPECIFICATION AND SEQUENCE .
- Always replace after removing
- Coat the exhaust manifold stud bolts with hot bolt paste. Refer To the Parts information for the hot bolt paste.
- Bolt
- 35 Nm
- O-ring
- Always replace after removing
- Coolant Return Line
- Bolt
- 9 Nm
- Turbocharger
- Can only be replaced with exhaust manifold and vacuum diaphragm.
- Removing and installing. Refer To TURBOCHARGER, REMOVING AND INSTALLING
- Bolt
- 30 Nm
- Bracket
- Support
- Bolt
- 30 Nm
- Bolt
- 30 Nm
- Coat The Bolt With Hot Bolt Paste. Refer To The Parts Information For The Hot Bolt Paste.
- Nut
- 30 Nm
- Always Replace After Removing
- Do Not Open When Removing The Turbocharger
- Coat The Exhaust Manifold Stud Bolts With Hot Bolt Paste. Refer To The Parts Information For The Hot Bolt Paste.
- Clamping Strip