Coolant Pump, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .
TIP:
Different versions depending on models and version.
-- Disconnect the connector -1- on the Engine Coolant Temperature Sensor -G62-.
-- Open the clamps -1 and 2-, remove the coolant hoses and move them to the side.
-- Remove the bolts -1 to 5-.
-- Remove the coolant pump from the centering pin and disconnect it from the engine oil cooler.