Checking Valve Timing - with Marks on the Cylinder Head Cover
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
TIP:
The combination of the shown :T40263 , : T40314 and 24 mm socket are better suited than the :T10355 for positioning the vibration damper.
-- Turn the vibration damper in the "TDC" position.
- The notch on the vibration damper must align with the arrow marking on the lower timing chain cover -arrow-.
- The markings -1- on the camshaft chain sprockets must be opposite the markings -2 and 3- on the cylinder head cover.