LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1084 (Cylinder Head, VALVETRAIN- CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Cam Adjustment Actuator, Removing And Installing >> Removing

Cam Adjustment Actuator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Required preliminary work. Refer to CAMSHAFT, REMOVING AND INSTALLING [For transmission(s) 0B5, 0CK] ; Cam Adjustment Actuator, Removing and Installing.

-- If installed remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

GWWA15-11794Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the cam adjustment actuator.

scientia non olet · About LEMON Manuals