Special Tools

WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Puller - Crankshaft/Power Steering Seal :T20143

Courtesy of AUDI OF AMERICA, LLC
Pressure Stand :T40099

Courtesy of AUDI OF AMERICA, LLC
Dual Clutch Lifting Device :T40123A and Dual Clutch Lifting Device - Sleeve :T40123A/2

Courtesy of AUDI OF AMERICA, LLC
Puller - Clutch Module :T40176

Courtesy of AUDI OF AMERICA, LLC
Guide Pins - Gearbox :T40288

Courtesy of AUDI OF AMERICA, LLC
Thrust Piece :T40300

Courtesy of AUDI OF AMERICA, LLC
Assembly Sleeve :T40308

Courtesy of AUDI OF AMERICA, LLC
Thrust Piece :T50038

Courtesy of AUDI OF AMERICA, LLC
Shop Crane :VAS6100

Courtesy of AUDI OF AMERICA, LLC
Engine Support Bridge - Additional Hooks (2 pc.) :10-222A/2

Courtesy of AUDI OF AMERICA, LLC