Dual Clutch, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Shop Crane :VAS6100
- Dual Clutch Lifting Device :T40123A and Dual Clutch Lifting Device - Sleeve :T40123A/2
- Pressure Stand :T40099
- Guide Pins - Gearbox :T40288
- Engine Support Bridge - Additional Hooks (2 pc.) :10-222A/2
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- Bolt - Dual clutch
- Bolt - Clutch slave cylinder
- Double shaft seal - Input shaft