LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> A4 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1081 (Engine System (Precautions & General Information - CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA)) >> 00 General, Technical Data >> Safety Precautions >> Safety Precautions When Working On Ignition System

Safety Precautions When Working On Ignition System

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Risk of injury due to electrocution

When the engine is running the ignition system is under high-voltage. It is possible to be electrocuted by touching the ignition system.

-- Never touch or remove the ignition wires when the engine is running or at cranking speed.

CAUTION:

Risk of damaging the components.

Washing the engine as well as connecting and disconnecting wires when the engine is running can damage components.

-- Switch off the ignition before connecting and disconnecting wires.

-- Switch off the ignition before washing the engine.

scientia non olet · About LEMON Manuals