Headlamps, removing and installing: Installing

Install in reverse order of removal, noting the following:

Fig 1: Checking Whether Vent Element Has Been Inserted On Underside Of Headlamp

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Check whether vent element has been inserted on underside of headlamp - detail  -.
• Slide headlamp horizontally onto lower headlamp mounting as far as it will go.

Fig 2: Locating Screws And Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Position stop screw - 1  - so that it makes contact with lock carrier.
• Use stop screw to align headlamp with body contours (gap widths).

Tightening torque