Parking Aid Control Module J446 , removing and installing

Removing

Sedan:

Fig 1: Removing Screws And Base Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Disconnecting Electrical Connections And Antenna Wiring At Rear Of Navigation Interface

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Where applicable, disconnect electrical connections and antenna wiring at rear of Navigation Interface R94 - 1 -.

NOTE:

Avant:

Fig 3: Removing Screws And Base Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

All:

Fig 4: Identifying Electrical Connections, Screws, And Parking Aid Control Module

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

Installing

Install in reverse order of removal.

Tightening torque

Component - fastener	Nm
Parking Aid Control Module J446 to body - screw	1.8