Preparation - vehicles with 1.8L 4-cylinder Turbo engine

Procedure 

Fig 1: Evaporative Emission Canister Purge Regulator Valve N80 And Air Duct

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws - arrows  -.
• Remove Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 N80 - 1  - at air duct.
• Remove air duct - 2  -.

Fig 2: Disconnect Wires/Unplug Connectors

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect electrical connections:

1. at Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 N80
2. at Mass Air Flow (MAF) Sensor G70
3. at Wastegate Bypass Regulator Valve N75

• Disconnect hoses - 4... 7  -.
• Disconnect hose to secondary air pump.
• Set aside wiring.
• Release fastener - 8  -.

• Remove air cleaner housing.

Install in reverse order of removal.