Headlamps with High Intensity Gas Discharge (HID) "Bi-Xenon" Lamps, assembly
NOTE:
- After performing any repairs or service that could affect headlight aim, check/adjust aim.
- Headlamp without adaptive light function (cornering lights) is illustrated.
1 - Screw - 1.5 Nm
2 - High intensity gas discharge (HID) lamp control module
- Left High-intensity Gas Discharge (HID) Lamp Control Module J343
- Right High-intensity Gas Discharge (HID) Lamp Control Module J344
- Removing and installing → High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing
3 - Headlamp housing
4 - Screw - 4.5 Nm
5 - Housing cover
- For parking/daytime running lamps
6 - Daytime running lamp (DRL) bulb
- 12 V, 21 W
- Replacing → Daytime Running Lamp (DRL) bulb, replacing
7 - Bulb holder
- For daytime running lamp (DRL) bulb
8 - Bulb holder
- For parking lamps
9 - Left Parking Lamp M1 , Right Parking Lamp M3 - bulb
- 12 V, 5 W
- Replacing → Parking Lamp M1 / M3 - bulb, replacing
10 - Screw - 4.5 Nm
11 - Housing cover
- For low beam headlamps
12 - Screw - 1.5 Nm
13 - High intensity gas discharge (HID) lamp
- 35 W, D1S
- Replacing → HID headlamp bulb, replacing
14 - Bulb holder
- For turn signal bulb
15 - Left Front Turn Signal Lamp M5 , Right Front Turn Signal Lamp M7 - bulb
- 12 V, 21 W
- Orange
- Replacing → Front Turn Signal Lamp M5 / M7 - bulb, replacing
16 - Trim cover