Headlamp securing lugs, servicing
NOTE:
- If headlight securing lugs break due to application of excessive force, it may still be possible to service headlight in a cost effective manner (though headlight housing must not be damaged).
- Different repair sets are available for left and right headlight.
Procedure
- Remove headlamp with broken retaining tab → Headlamps, removing and installing .
- Remove remains of broken lug - 3 - and - 4 - on headlamp housing.
- Attach lug - 2 - from repair kit to edge of headlight housing and secure it with two screws - 1 -.
Tightening torque
| Component | Nm |
| Headlamp to lock carrier | 6 |