Fog lamp bulb - Audi A4, replacing
Removing
- Turn light switch to position "0".
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
Vehicles with charge air cooler:
- Remove front bumper cover → 63 BUMPER .
Vehicles without charge air cooler:
- Release fasteners - 1 - and - 2 - and remove front noise insulation.
All models:
- Disconnect electrical connection - 2 -.
- Turn bulb - 1 - counter-clockwise - arrow - and remove from housing.
Installing
Install in reverse order of removal, noting the following:
CAUTION:
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.
- When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.
- Insert bulb and secure by turning in clockwise direction.
Vehicles with charge air cooler:
- Install front bumper cover → 63 BUMPER .
All models:
- Check and adjust fog lamps if necessary → 00 - TECHNICAL DATA .