Headlamp washer spray jets, removing and installing

Removing

NOTE:

To protect the bumper cover, place a cloth under pliers before taking hold of the spray jet.

Fig 1: Pulling Cover Of Spray Jet Upwards Away From Bumper Cover And Carefully Disengaging Retainers

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull cover - 1 - of spray jet - 2 - upwards away from bumper cover and carefully disengage retainers in direction of - arrow -.

Fig 2: Identifying Hose, Spray Jet, And Screws

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing

Install in reverse order of removal, noting the following:

Tightening torque

Component - fastener	Nm
Spray jet to bumper cover - screw	3