Radio Frequency Controlled Clock Receiver J489 , removing and installing

CAUTION:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

NOTE:

J489 only where applicable.

Removing

Remove rear bumper cover → 63 BUMPER .

Fig 1: Identifying Electrical Connection, Receiver, And Bolts

GW00021599

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical connection - 3 - at receiver - 2 -.
Remove bolts - 1 - and remove receiver.

Installing

Install in reverse order of removal, noting the following:

Install rear bumper cover: → 63 BUMPER .