Fuel Level Sensor G , Fuel Level Sensor 2 G169 - quattro, multi-pin connector assignments
CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
Preparations
- Remove rear seat bench → 72 - SEAT - FRAMES .
Fuel Level Sensor G
- Remove screws - arrows - and remove right access panel.
- Carefully release and disconnect 4-pin connector - arrow - (right-side).
Assignment of 4-pin connector at fuel level sensor.
- Fuel pump positive ( + )
- Sensor to fuel gauge
- Sensor Ground (GND) ( - )
- Fuel pump Ground (GND) ( - )
Fuel Level Sensor 2 G169
- Remove screws - arrows - and remove left access panel.
- Carefully release and disconnect 4-pin connector - arrow - (left-side).
Assignment of 4-pin connector at fuel level sensor 2
- Vacant
- Sensor to fuel gauge
- Sensor Ground (GND) ( - )
- Vacant