Head restraint guides, removing and installing

Fig 1: Headrest Guides, Removing/Installing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Removing 

NOTE:

• For improved clarity, head restraint guide - 1  - is shown removed.

• Insert padding needle or screwdriver - 3  - with maximum width of 2 mm into hole - 4  - (hole - 4  - is opposite retaining clip for head restraint guide).
• Pry screwdriver - 3  - in direction of arrow - A  - , press retainer tab - 2  - in direction of arrow - B  - , and pull out head restraint guide - 1  -.

• Installing 

• Installation is reverse of removal.