Outer frame, removing and installing

1 - Front seat

2 - Clips (2x)

3 - Outer frame

• Removing 

• Remove backrest cover panel → Backrest cover panel, removing and installing .
• Pry out staples - 8  - (4x) on left and right.
• Remove velcro strips - 7  - (4x) on left and right.
• Disengage piping on side - 9  - (2x).

• Pry out piping at bottom - 6  - (3x).
• Pry out clips - 4  - (3x).
• Pry out clips - 2  - (2x).
• Remove outer frame - 3  - from backrest frame.

• Installing 

• Lock outer frame - 3  - at holders - 5  - (2x) in backrest frame.
• Install outer frame - 3  - in reverse order of removal.

4 - Clips (3x)

5 - Holders (2x)

6 - Bottom piping (3x)

7 - Velcro strips (4x)

8 - Staples (4x)

• Commercially available.
• Only use upholstery stapler.

9 - Side piping (2x)