Microswitch for headrest, assembly overview

Fig 1: Microswitch For Headrest, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Cable tie

2 - Connector

3 - Circlip

4 - Microswitch for headrest

• Removing 

• Remove backrest panel → Backrest cover panel, removing and installing .
• Use a screwdriver to pry out circlip - 3  -.
• Press together catches - 5  - (2x) and remove microswitch - 4  -.
• Disconnect connector - 2  -.

• Installing 

• Press in microswitch - 4  - until the catches - 5  - (2x) engage.
• Connect connector - 2  -.
• Install seat → Seat, assembly overview .
• Adjust microswitch for headrest → Microswitch for headrest, adjusting .

• Insert the circlip - 3  -.
• Install backrest panel → Backrest cover panel, removing and installing .

5 - Catches (2x)