Handle for variable convertible top compartment, removing and installing

• Removing 

• Remove handle mount trim → Handle mount trim, assembly overview .

Fig 1: Identifying Fuse, Pin, Handle & Bowden Cable

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Using a small flat screwdriver, pry out fuse - 2  - (always replace fuse - 2  -).
• Press out pin - 3  -.
• Remove handle - 1  -.

1 - Handle

2 - Fuse

- Always replace

3 - Pin

4 - Bowden cable

• Installing 

• Installation is in reverse order of removal.