Coolant Fans

WARNING: This page is about a different variant/trim than selected.

Removing

-- Remove fan shroud. Refer to FAN SHROUD .

-- Disconnect the connector -1-.

Fig 1: Disconnecting Electrical Harness Connector And Lay Cable Free

Courtesy of AUDI OF AMERICA, LLC

-- Free up the cables.

-- Remove nuts -arrows- and remove fans.

Installing

Install in reverse order of removal. Note the following:

For the correct tightening specifications, refer to RADIATOR AND COOLANT FAN OVERVIEW

-- Install fan shroud. Refer to FAN SHROUD .