Coolant Fan -V7- AND Coolant Fan 2 -V177-
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi TT Quattro, 2014 Audi TT Quattro, 2013 Audi TT, 2012 Audi TT, and 2011 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove fan shroud. Refer to FAN SHROUD .
-- Disconnect the connector -1-.
-- Free up electrical wires.
-- Remove nuts -arrows- and remove coolant fan.
Installing
- For the correct tightening specifications, refer to RADIATOR, FAN SHROUD AND COOLANT FAN OVERVIEW .
Installation is carried out in the reverse order while noting the following:
-- Install fan shroud. Refer to FAN SHROUD .