Fan Shroud

Special tools and workshop equipment required

Removing

-- Remove the bolts -1- from above.

Fig 1: Fan Shroud Bolts And Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove center noise insulation fasteners -1 to 4-.

Fig 2: Center Noise Insulation Fasteners And Center Noise Insulation Panel

Courtesy of AUDI OF AMERICA, LLC

-- Remove the air duct -1 and 2- for charge air cooler.

Fig 3: Air Cooler Air Duct

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

Fig 4: Fan Shroud Bolts And Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -3- and remove the fan shroud downward and off.

Installing

Install in reverse order of removal. Note the following:

For the correct tightening specifications, refer to RADIATOR AND COOLANT FAN OVERVIEW

-- Air guide pipes with connector, installing. Refer to HOSE CONNECTIONS WITH CONNECTOR COUPLINGS, ASSEMBLING .