Fastener Tightening Specifications

Component	Bolt Size	Nm
Bracket for Wastegate Bypass Regulator Valve	-	7
Bracket to Turbocharger⁶	-	30
Bracket to Turbocharger⁷	-	23
Charge Air Pressure Sensor	-	5
Charge Air Pipe	-	10
Connection	-	9
Coolant Supply Line²
	-	23
	-	35
Coolant Return Line
	-	9
	-	35
Fastening Strip, Nut⁵	-	30
Heat Shield	-	9
Mount for Charge Air Cooler	-	5
Nipple	-	8
Oil Return Line	-	9
Oil Supply Line¹
	-	9
	-	30
Oil Supply Line to Oil Filter Bracket	-	25
Right Charge Air Pipe to Oil Pan	-	10
Rear Charge Air Tube to Bracket	-	10
Turbocharger, Nut^{3, 5}	-	21
Turbocharger Recirculating Valve	-	7
Turbocharger Vacuum Diaphragm
-Nut⁸	-	9
-Bolt	-	10
Wastegate Bypass Regulator Valve	-	3
¹ For bolt tightening clarification, refer to PART II and see items -2, 5 and 6- ² For bolt tightening clarification, refer to Part II and see items -8, 11 and 12- ³ Always replace ⁴ For bolt tightening clarification, refer to PART III and see items -3 and 5- ⁵ Coat stud bolts on exhaust manifold with hot bolt paste. ⁶ For bolt tightening clarification, refer to PART III and see items -8- ⁷ For bolt tightening clarification, refer to PART III and see items -11- ⁸ Secure with sealing wax