Replacing slide washer, 92 mm diameter wheel bearings

Fig 1: Identifying Conventional Wheel Hub & Slide Washer

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Carefully pry out old slide washer - 1  - with a screwdriver.
• Position new slide washer on wheel hub.

Fig 2: Press Piece VW 473, Assembly Tool T40089/2, Slide Washer, Wheel Hub & Thrust Plate VW 401

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Install special tools as shown in illustration.

1. Press piece VW 473
2. Thrust piece T40089/2 , for 92 mm diameter wheel bearings
3. Slide washer
4. Wheel hub
5. Thrust plate VW 401

NOTE:

• Slide washer must be pressed on up to wheel bearing hub radius.