Backrest Cover, Separating from Upholstery

Special tools, testers and auxiliary items required 

• Awl V.A.G 1636 A

1 - Awl V.A.G 1636 A

2 - Retainer

3 - Plastic clips

4 - Backrest frame

5 - Rubber pieces (2x)

6 - Side clamping strips (6x)

7 - Upholstery clips (4x)

8 - Lower clamping strips (5x)

9 - Backrest heating connector

10 - Retaining strip

11 - Cover and upholstery

• Removing 
• Using Awl V.A.G 1636 A - 1  -, carefully pry retainer - 2  - out of plastic clips - 3  -.
• Remove cover from cushion.
• Installing 

• Install cover in reverse order of removal.
• Replace damaged plastic clips - 3  -.
• First press retainers - 2  - of cross braces into plastic clips - 3  -.