LED Circuit Boards and Tail Lamp Control Module, Removing and Installing

Fig 1: Pressing Catches Apart And Detaching Housing Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Remove inner rear light → Inner Tail Lamps, Removing and Installing .
• Press catches apart - arrows  - and detach housing cover.
• Disconnect connector.

Fig 2: LED Boards With Tail lamp Control Module Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - 1 through 3  - and remove LED boards with Tail lamp Control Module.

Installing 

Install in reverse order of removal, observing the following:

• Install inner rear light → Inner Tail Lamps, Removing and Installing .

Tightening torque 

Removing 

Fig 1: Pressing Catches Apart And Detaching Housing Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove inner rear light → Inner Tail Lamps, Removing and Installing .
• Press catches apart - arrows  - and detach housing cover.
• Disconnect connector.

Fig 2: LED Boards With Tail lamp Control Module Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - 1 through 3  - and remove LED boards with Tail lamp Control Module.

Installing 

Install in reverse order of removal, observing the following:

• Install inner rear light → Inner Tail Lamps, Removing and Installing .

Tightening torque