Radio Frequency Controlled Clock Receiver, Removing and Installing

Removing 

Fig 1: Radio Frequency Controlled Clock Receiver J489, Electrical Connector & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove rear bumper cover → 63 - BUMPERS .
• Separate electrical connector - 2  - to Radio Frequency Controlled Clock Receiver J489 - item 1  -.
• Remove bolts - arrows  - and detach Radio Frequency Controlled Clock Receiver J489.

Installing 

Install in reverse order of removal, observing the following:

• Install rear bumper cover → 63 - BUMPERS .

Tightening torque