Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| Components | Fastener Size | Nm |
|---|---|---|
| Front Bumper | ||
| Air inlet grille to bumper cover bolt | - | 1 |
| Bumper to lock carrier | ||
| - Torx® bolt | - | 3.5 |
| - Combination bolt | M6 x 60 | 8 |
| Bumper cover combination bolt | - | 1.5 |
| Bumper cover quick release bolt 1 | - | 4 |
| Front guide piece bolt | - | 1 |
| Impact absorber to longitudinal members bolt | - | 20 |
| Impact protection quick release bolt | - | 4 |
| Lock carrier cover bolt | - | 1.5 |
| Radiator grille to bumper cover bolt | - | 1 |
| Spoiler to impact member bolt (allroad) | - | 2 |
| Rear Bumper | ||
| Bumper crossmember to shock absorber bolt | - | 20 |
| Cross member for bumper to body | ||
| - Bolt | - | 20 |
| - Nut | - | 4 |
| Impact protection quick release bolt | - | 4 |
| Left adjusting piece to body bolt | - | 1 |
| Removal hand wheel bolt | - | 20 |
| Right adjusting piece to body bolt | - | 1 |
| Shock absorber to body bolt | - | 20 |
| Spoiler to impact protection bolt | - | 2 |
| Strap to body bolt (Sedan) | - | 1.5 |
| Guide piece bolt | - | 1 |
|
||