LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> S5 >> Repair and Diagnosis >> External Pages >> Different car >> Section 537 (Exterior Body Panels (Hood, Lids) (Sedan)) >> (55 Hood, Lids) >> Hood >> Impact Guard, Removing And Installing

Impact Guard, Removing And Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The impact guard is also equipped with double-sided adhesive tape.

Fig 1: Identifying Impact Guard (Equipped With Double-Sided Adhesive Tape)
GWWA55-10306Courtesy of AUDI OF AMERICA, LLC
  1. Door
  2. Impact Guard
    • To remove, remove the clip from the hood and then remove the impact guard.
  3. Clip
scientia non olet · About LEMON Manuals