Engine, Supporting In Installation Position

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Engine Support Bridge:10-222A

Supporting

Fig 1: Installing 10 - 222 A With 10 - 222 A /3 On Left And Right Strut Towers

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Position the :10-222A with the :10-222A/3 on the left and right fender bolting edges as shown.

-- Engage the :10-222A/11 on the engine lifting eye.

-- Lightly pretension the engine with the spindles.