Overview - SUBFRAME Mount
- Bolt
- 20 Nm
- Retaining Plate
- For The Engine Mount
- If The Engine Mount Is Faulty, Replace The Retaining Plate
- Check The Retaining Plate On The Opposite Side; Replace If Necessary
- Stop Buffer
- Not Available Individually
- Bolt
- 40 Nm
- Engine Support
- Bolt
- 10 Nm
- Heat Shield
- Lower Left Coolant Pipe
- Bolt
- Tightening specification -item 26) OVERVIEW - COOLANT PIPES - Bolt .
- Bolt
- 90 Nm + 90° turn
- Always Replace
- Engine Mount
- With The Electro-Hydraulic Engine Mount Solenoid Valve
- Left Electrohydraulic Engine Mount Solenoid Valve -N144-, Right Electrohydraulic Engine Mount Solenoid Valve -N145-
- Removing and installing. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING . Refer to RIGHT ENGINE MOUNT, REMOVING AND INSTALLING
- Replace In Pairs
- Subframe
- Bolt
- 55 Nm
- Bolt
- 55 Nm