LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> S5 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN [CAUA] (Coupe) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Overview - VALVETRAIN >> -- Tighten The Bolts In Three Steps And In The Sequence Shown:

-- Tighten The Bolts In Three Steps And In The Sequence Shown:

Step Bolts Tightening Specification/Additional Turn
1. -1 to 24- Install all the way in by hand.
  • The guide frame must touch the entire contact surface on the cylinder head.
2. -1 to 24- 8 Nm
3. -1 to 24- Tighten an additional 90°
scientia non olet · About LEMON Manuals