Clutch Pressure Plate &/Or Disc: Remove & Replace

Includes: R&I Engine or Transaxle Assembly (where applicable). DOES NOT include resurface Flywheel.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		9.4		C
Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace:
		0.8		C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
		0.2		C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		0.5		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.3		C
Combination Procedure: FLYWHEEL (REMOVED): Resurface:
		0.8		B