Overview - Power Take-Off Drive Chain
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Crankshaft
- Drive chain
- For power take-off
- Mark the running direction with paint for reinstallation
- Removing and installing. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING
- Drive Chain Sprocket
- For the oil pump
- Installed position: the side with lettering on it faces the engine
- Bolt
- 30 Nm + 90° turn
- Replace
- Pressure Spring
- Bolt
- 15 Nm + 90° turn
- Replace
- Balance Shaft Chain Sprocket
- Installed position: the side with lettering on it faces the transmission
- Chain Tensioner
- With glide track
- Bolt
- 10 Nm + 45° turn
- Replace