LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Spray Nozzles, Removing And Installing

Spray Nozzles, Removing And Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Removal 

-- Turn off the ignition and remove the key.

-- Remove the spray nozzle -1- from the hood in direction of -arrow-.

Fig 1: Identifying Spray Nozzle
GWWA92-10042Courtesy of AUDI OF AMERICA, LLC

-- Remove washer fluid line -2- at unclipped spray nozzles -1-.

-- Disconnect electrical connector -3-.

Fig 2: Identifying Washer Fluid Line -2- At Unclipped Spray Nozzles -1-
GWWA92-10043Courtesy of AUDI OF AMERICA, LLC

Installation 

Install in reverse order of removal. Note the following:

-- When attaching water hose, make sure it engages audibly in connection of nozzle.

-- Install the spray nozzle into the hood.