LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Headlamp Washer System >> Headlamp Washer System Spray Nozzles, Removing And Installing >> Installation

Headlamp Washer System Spray Nozzles, Removing And Installing: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections using standard hose clamps .

-- Install the clamp with Hose Clip Pliers VAG1275A.

-- Install front bumper cover, refer to FRONT BUMPER, REMOVING AND INSTALLING .

Tightening Specifications 

Component Nm
Nozzle to bumper cover 2, 5
scientia non olet · About LEMON Manuals