Engine Oil Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Vehicles without the After-Run Coolant Pump -V51- :
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
Vehicles with the After-Run Coolant Pump -V51- :
-- Remove the after-run coolant pump -V51-. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .
All Vehicles:
-- Open the clamp and remove the coolant hose -1- and, if necessary, -2- from the oil cooler.
-- Place the Used Oil Collection and Extraction Unit SMN372500 under the engine.
-- Remove the bolts -arrows- and remove the engine oil cooler.