Rear Floor Covering, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Observe the following when doing so:
NOTE:
Carefully install the floor covering in order to avoid damage.
-- Slide the rear floor covering onto the front floor covering. Raise the center console rear area slightly in order to position the floor covering correctly.
-- Ensure that all floor covering cut-outs are positioned correctly.