Footrest Cover And Bracket, Removing And Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Refer to FOOTREST COVER AND BRACKET, REMOVING AND INSTALLING .

Removing

-- Remove lower instrument panel trim on driver side. Refer to INSTRUMENT PANEL COVERS ON DRIVER SIDE OVERVIEW .

-- Remove the lower A-pillar trim. Refer to LOWER A-PILLAR TRIM, REMOVING AND INSTALLING .

-- Remove screw. Refer to -Item 2- FOOTREST COVER AND BRACKET OVERVIEW.

-- Slide the footrest cover upward until the tab disengages from the footrest bracket window.

-- Remove the footrest cover.

Installing

Install in reverse order of removal. Observe the following when doing so:

-- Ensure that the tab engages correctly. Refer to -Item 6- FOOTREST COVER AND BRACKET OVERVIEW in the footrest bracket window.

Removing and Installing the Footrest Bracket:

-- Remove the footrest cover. Refer to FOOTREST COVER AND BRACKET, REMOVING AND INSTALLING .

-- Fold the floor covering back in the footrest area.

-- Remove 3 nuts. Refer to -Item 5- FOOTREST COVER AND BRACKET OVERVIEW.

-- Remove the footrest bracket.

Install in reverse order of removal.