Window Frame Trim, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Observe the following when doing so:
-- First position back of window frame trim on outer edge of frame.
-- Pull window frame trim -2- over window frame seal -1-. Trim must engage in groove -arrow-.
-- Pull Trim Removal Wedge3409 between window frame trim -1- and door seal -2- along the entire length and at the same time, press window frame trim onto frame in seal groove.