Window Frame Trim, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Folding Window Frame Trim -1- Over Window Guide -2- -Arrow- Using 3409

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Observe the following when doing so:

-- First position back of window frame trim on outer edge of frame.

-- Pull window frame trim -1- with Trim Removal Wedge3409 over window frame seal -2-.

NOTE:

Ensure window frame seal is not pulled off of window frame.

-- Pull Trim Removal Wedge3409 between window frame trim -1- and door seal -2- along the entire length and at the same time, press window frame trim onto frame.

Fig 2: Pull 3409 Between Window Frame Trim -1- And Door Seal -2-

Courtesy of AUDI OF AMERICA, LLC