Special Tools

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Toothed Belt PulleyT10320

Fig 1: Identifying Puller T10320
Courtesy of AUDI OF AMERICA, LLC
O-Ring Assembly SleeveT10377

Fig 2: Guide Sleeve T10377
Courtesy of AUDI OF AMERICA, LLC
Crankshaft SocketT40058

Fig 3: Adapter (Socket) T140058
Courtesy of AUDI OF AMERICA, LLC
Union Nut SocketT40055

Fig 4: Identifying Socket T40055
Courtesy of AUDI OF AMERICA, LLC
High Pressure Pump Sprocket Locking ToolT40135 for adjusting the high pressure pump.

Fig 5: Identifying Locking Tool T40135
Courtesy of AUDI OF AMERICA, LLC
Torque Wrench 1331 Insert - Open Jaw - 17mmVAG1331/6

Fig 6: Assembly Tool SW 17 V.A.G 1331/6
Courtesy of AUDI OF AMERICA, LLC
Test Box Kit - AdapterVAG1598/39-1
Test Box Kit - 94 Pin AdapterVAG1598/39-2
Test Box Kit - 105 Pin Test Box KitVAG1598/42

Fig 7: Adapter Cable V.A.G 1598/39 & Test Box V.A.G 1598/42
Courtesy of AUDI OF AMERICA, LLC
Wiring Harness Repair Set - Hot Air BlowerVAS1978/14A -1- with nozzle attachment -2- from the Wiring Harness Repair SetVAS1978B
Small commercially available locking pliers -3-

Fig 8: Heat Gun, Adapter Nozzle And Locking Pliers
Courtesy of AUDI OF AMERICA, LLC
Hand Vacuum PumpVAS6213

Fig 9: Hand Vacuum Pump VAS 6213
Courtesy of AUDI OF AMERICA, LLC
Fuel Return System TesterVAS6330

Fig 10: Identifying Tester for Fuel Return System VAS 6330
Courtesy of AUDI OF AMERICA, LLC
Breakout Box w/Detachable TerminalsVAS6606
Test Adapter - Isolator Box 1VAS6606/1 with the following:
- Isolator Box - Module 2VAS6606/2
- Isolator Box Module 3VAS6606/3
- Template - Isolator BoxVAS6606/1-1
- Isolator Box - Module 2 TemplateVAS6606/2-1
- Template - Isolator BoxVAS6606/3-1
- VAS6606/7

Fig 11: Breakout Box w/ Detachable Terminals VAS6606
Courtesy of AUDI OF AMERICA, LLC
Return Flow MeterVAS6684

Fig 12: Return Flow Meter VAS6684
Courtesy of AUDI OF AMERICA, LLC
Pry Lever80-200

Fig 13: 80-200 Pry Lever
Courtesy of AUDI OF AMERICA, LLC
Wrench - Pin Type3036

Fig 14: Identifying Counter-Hold Tool 3036
Courtesy of AUDI OF AMERICA, LLC
Hose Clamps - Up To 25 mm3094

Fig 15: 3094 Hose Clamps
Courtesy of AUDI OF AMERICA, LLC
Crankshaft Holder3242

Fig 16: Crankshaft Holder 3242
Courtesy of AUDI OF AMERICA, LLC
Ring Wrench 7-Piece Set3337

Fig 17: 3337 Oxygen Sensor Ring Spanner
Courtesy of AUDI OF AMERICA, LLC
Not illustrated:
Hose Clamps - Up To 25mm3094
Puller - Unit InjectorT10055 with Puller - Unit Injector - Adapter 1T10055/1
Puller - Toothed Belt PulleyT10320
30 mm Open End WrenchT10553
Union Nut SocketT40055
Puller - PulleyT40064
High Pressure Pump Sprocket Locking ToolT40135
Fuel Measuring UnitVAG1348/2B