Right Intake Manifold Lower Part, Removing And Installing: Installing

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications: Intake manifold overview. Refer to OVERVIEW - INTAKE MANIFOLD

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals

-- Install the upper part of the intake manifold. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .

-- High pressure lines, installing. Refer to HIGH PRESSURE LINES, INSTALLING .

-- Inspect the fuel system for leaks. Refer to FUEL SYSTEM BLEEDING AND CHECKING FOR LEAKS .