Left Intake Manifold Lower Part, Removing And Installing: Installing

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications. Refer to OVERVIEW - INTAKE MANIFOLD

Install in reverse order of removal. Note the following:

NOTE:

Replace seals and sealing rings.

-- Install the upper part of the intake manifold. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .

-- High pressure lines, installing. Refer to HIGH PRESSURE LINES, INSTALLING .