LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2008 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (3.0L - Cooling System - Engine Code: CNRB) >> 19 Cooling System >> Coolant Pump And Thermostat >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING

Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The thermostat is integrated into the oil filter housing and cannot be replaced separately.

The seals on the oil filter housing are only useable once and not available as a replacement part. They must be replaced after removing the oil filter housing.

-- Oil filter housing, removing and installing. Refer to OIL FILTER HOUSING, REMOVING AND INSTALLING .