Regulator Valve Assembly Overview, 6.0L (V12)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2011 Audi Q7, and 2010 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel Supply Hose
- To fuel filter
- To the connection on the filter housing cover identified with "VF2"
- Fuel Return Hose
- From the engine (left cylinder bank)
- Fuel Supply Hose
- To fuel filter
- To the connection on the filter housing cover identified with "VF1"
- Spring Clamp
- Regulator valve
- Flow direction identified with "VL" or "RL" and arrows
- Do not interchange connections
- Removing and installing, refer to REGULATOR VALVE, REMOVING AND INSTALLING, 6.0L (V12) .
- Fuel Supply Hose
- From the fuel tank
- Fuel Return Hose
- to the fuel system cooler
- Fuel Supply Hose
- From the fuel tank
- Fuel Return Hose
- to the fuel system cooler
- Foam Bracket
- For the regulator valves
- Regulator valve
- Flow direction identified with "VL" or "RL" and arrows
- Do not interchange connections
- Removing and installing, refer to REGULATOR VALVE, REMOVING AND INSTALLING, 6.0L (V12) .
- Fuel Return Hose
- From the engine (right cylinder bank)