Fan Shroud, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cover Over Radiator -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Pull cover over radiator in direction of -arrows-.

WARNING:

Danger of personal injury due to the coolant fan turning on by itself.

Disconnect the connectors before working near the fan shroud.

-- Remove the bolts -1, 4, 5 and 6- from the fan shroud, if equipped.

-- Disconnect the connectors -2 and 3- and free up the wires.

-- Press locking tabs at left and right on fan shroud in direction of -arrow- and at the same time, lift fan shroud out of engine compartment.

Fig 2: Identifying Screws And Connectors On Fan Mount And Pressing Locking Tabs At Left And Right On Fan Shroud -Arrow-

Courtesy of AUDI OF AMERICA, LLC